西南某岩溶区地下水系统示踪试验与解析     

张浪  李俊  潘晓东  黄晓荣  彭聪 《中国岩溶》2020,39(1):42-47

以西南某典型岩溶区为例,解析示踪试验在岩溶管道连通性以及获取水文地质参数中的应用。选择落水洞为投放点,分别从落水洞西侧和东侧寻找地下水出露点作为接收点,判别落水洞地下径流的实际去向以及落水洞与接收点之间的水力联系。结合Qtracer2软件对示踪试验成果进行定量解析,确定示踪剂回收率、地下水平均流速、最快流速,估算出岩溶管道结构特征和水文地质参数。结果表明:落水洞与接收点JS01、JS03之间不存在直接水力联系;落水洞与接收点JS02存在水力联系且岩溶管道极为发育,含水介质不均匀,地下水运移路径较为通畅,为典型的紊流流态;落水洞地下径流的主要方向是由西向东,但在丰水期雨量较大期间,接收点JS04能够接收到荧光素钠,说明丰水期水位上涨后两者间会有水力联系,导致部分水量向落水洞西侧排泄。  相似文献   

西太平洋Y3海山对营养盐的影响及其生态环境效应     

马骏  宋金明  李学刚  袁华茂  李宁  段丽琴  王启栋 《地学前缘》2020,27(4):322-331

作为大洋典型地貌特征的海山,其邻近的海洋生境并不被人熟知。依据2014年冬季对热带西太平洋Y3海山及其邻近海域的综合调查,首次探讨了该海山区海水中营养盐的分布特征及其与生态环境的耦合关系。结果表明Y3海山区是典型的热带寡营养海域。在50~125 m的深度,温跃层和高盐区双重作用对底部高浓度营养盐向上输送的阻碍,是导致真光层上部营养盐浓度较低的重要原因;同时,浮游植物和异养细菌的消耗也加剧了该区域营养盐的缺乏。Y3海山突出的地形地貌对营养盐的分布产生重要的影响,海山对流经的海流产生阻碍,形成上升流,使底部高浓度的营养盐突破温跃层和高盐区的阻碍向上输送,从而使海山周围营养盐的平均浓度高于远离海山的海域。相关性分析显示,Y3海山区真光层中营养盐浓度与温度、盐度、叶绿素a浓度和异养细菌丰度分别呈负相关、正相关、负相关(除NO₂-N外)和负相关关系。海山区特殊的营养盐分布及其与生态环境的耦合是其成为一种独特的大洋生态系统的重要因素。  相似文献   

甘肃迭部地区地质遗迹资源类型与开发利用及保护     

李小强  闫少波  脱世博  王军  任文秀  刘明强  李通国 《地质论评》2020,66(6):1719-1728

通过调查研究发现甘肃迭部地区地质遗迹资源涵盖3大类7类13亚类，尤以碳酸盐岩（岩溶地貌）、峡谷及冰川地貌等资源最为典型。区内数量繁多且独具特色的地质遗迹资源，是对中生代以来青藏高原东北缘地区沉积地层演化与区域构造—气候耦合过程中的重要地质事件的灵敏反映与记录者。提出了以政府引导与规范管理、协调统一与科学规划及品牌宣传的保护与开发利用建议，可为政府对迭部地区旅游产业整体规划、发展、决策和生态环境保护等提供依据，为开发这一地区的旅游资源提供引导。  相似文献   

Application of flocculation combined with vacuum preloading to reduce river-dredged sludge     

Feiyu Liu  Wenqing Wu  Jun Wang  Jun Hai  Yuanqiang Cai 《Marine Georesources & Geotechnology》2020,38(2):164-173

Abstract

To achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl₃ or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl₃ and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals.  相似文献   

透明胞外聚合颗粒物碳输运新途径   总被引：2，自引：1，他引：1  

孙军  郭聪聪  张桂成 《海洋学报》2019,41(8):125-130

目前大家普遍认为，透明胞外聚合颗粒物(Transparent Exopolymer Particles，TEP)因其独特的凝聚效应导致碳通量向海底输出。但是，近几年的研究表明TEP不仅影响了碳沉降途径，其本身能够悬浮甚至向海水表层迁移，导致其在海洋微表层(Surface Micro-layer, SML)积累，最终显著影响海洋表层碳通量。TEP和其他颗粒物聚集形成凝聚物后，其运动趋势则由凝聚物中TEP的含量占比，即最终颗粒物密度所决定。一个新的值得注意的现象是，密度低的TEP通过与其他微粒聚合形成表面活性物质(Surface-active Substances, SAS)，会在海洋–大气界面形成薄膜，显著影响海–气CO₂交换通量，甚至对全球气候变化造成影响。  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

基于斩波轮技术的K波段接收机噪声校准研究          下载免费PDF全文

王凯  王洋  陈卯蒸  段雪峰  闫浩  马军  陈晨雨  曹亮 《天文学报》2020,61(1):1

接收机是射电天文中用于探测微弱射电信号的重要接收设备.接收机的强度校准就是将接收机对射电源的响应转换为天文意义上的流量密度.常规方法就是使用经典的冷热负载法,将接收机自身的强度响应转换为一个等效的温度值,之后再据此对射电源做进一步标定.通过搭建基于斩波轮技术的K波段接收机强度校准平台,使用斩波轮法测试K波段常温接收机的噪声温度,并与传统冷热负载法的测试结果进行比对.结果显示,在晴好天气条件下,斩波轮法在30°、90°仰角下噪声温度的最大测试误差为7.5%和8.4%,可以很好地应用于实际噪声温度测试中;但在5°仰角测试中,由于过低仰角引入了地面噪声,使得斩波轮法的测试误差上升至20%–30%之间而无法使用.希望在此基础上进一步开展K波段天空亮温度的理论计算与实测,从而完善斩波轮技术的应用,使之可以满足在不同气象条件下的噪声校准测试需求.  相似文献   

基于参与式制图方法的景观服务评估与空间结构研究     

朱亚茹  高峻  邴振华  张中浩  付晶 《地球信息科学学报》2020,22(5):1106-1119

景观服务评估核心是人与环境之间复杂的动态关系,基于利益相关者的参与式制图方法是建立景观服务分类体系和量化指标的有效途径。本文采用参与式制图方法,以九寨沟自然保护区为例,根据景观服务分类研究成果,并结合九寨沟自然资源特点和景观服务使用者半结构式访谈数据,提出了适用于九寨沟的景观服务指标体系。本研究方法以管理局工作人员、居民和游客等服务使用者作为参与式调研对象,分别就其需求和景观服务感知程度进行半结构式访谈,并利用GIS技术将数据空间位置和功能属性结合,得到九寨沟有3大类景观服务和17个相关指标,以及737个景观服务点。通过研究结果可知,当地村落建筑与众多景观服务指标（包括观鸟场所、野营旅游、民俗与节庆等13个指标）具有极强的空间关联性。同时,景观服务使用者感知的景观价值在空间上属于聚集分布形式,主要围绕着开放生态旅游的3条沟谷分布,并向外围扩散。其中景观服务的“高—高”空间聚集区主要分布在沟口等与人类需求密切联系的区域,而景观服务的“低—低”空间聚集区则主要分布在原始森林等与人类居住、活动相距较远的区域。综上,基于参与式制图方法建立的景观服务分类和空间分析,发现九寨沟景观服务的空间位置与使用者紧密相关,其景观价值的空间结构特征是服务使用者与环境长期互动的结果,该结果可以用来引导并进一步优化九寨沟的功能分区规划。  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献